DIY Safe Solar Eclipse Pinhole Projector: Watch the Eclipse Safely

🌑The DIY safe solar eclipse pinhole projector is a popular and effective way to watch the eclipse without special glasses.

📦You can easily create the pinhole projector using common household items like a shoebox, tin foil, and white paper.

🌞The pinhole projector works by allowing a small amount of sunlight to pass through the pinhole and reflect onto the white paper, creating a small image of the eclipse.

👧👴This DIY project is suitable for all ages and can be a fun activity to do with kids or grandparents.

👁️‍🗨️Remember to never look directly at the Sun during an eclipse. Always use proper safety measures like the pinhole projector or certified eclipse glasses.

Is it safe to watch a solar eclipse without special glasses?

—No, it is not safe to directly look at a solar eclipse without special glasses or proper eye protection. Using a pinhole projector or certified eclipse glasses is recommended.

How does the pinhole projector work?

—The pinhole projector works by allowing a small amount of sunlight to pass through a pinhole and reflect onto a white surface, creating a small image of the eclipse.

Can I use any size box to make a pinhole projector?

—Yes, you can use any size box as long as you follow the instructions to cut a hole for the pinhole and place a white surface inside the box.

Can I reuse the pinhole projector for future eclipses?

—Yes, you can reuse the pinhole projector for future eclipses as long as the box and pinhole are in good condition.

Where can I find certified eclipse glasses?

—Certified eclipse glasses can be found at reputable retailers, astronomy clubs, or online. Ensure that the glasses meet the necessary safety standards before purchasing.

00:00Introduction to the DIY safe solar eclipse pinhole projector.

01:26Demonstration of cutting a hole in the shoebox for the pinhole projector.

02:43Covering the hole with tin foil and poking a pinhole in the foil.

03:53Placing a piece of white paper inside the box to create the projection surface.

04:25Completing the pinhole projector by closing the box and cutting a viewing hole in the side.