DIY Brake Job on a Toyota 4Runner - Interesting Maneuvering Required

TLDRThis video shows the process of performing a brake job on a Toyota 4Runner with interesting maneuvering required. The customer attempted to do their own brake job but encountered issues with the front calipers. The video demonstrates how to remove and replace the calipers, clean the rotor, and install new brake pads. The fixed caliper design and the use of slide pins make the process easier. The video also highlights the importance of patience and challenges faced by flat rate technicians.

Key insights

🚗The limited body style Toyota 4Runner in the video requires maneuvering due to obstacles in the shop.

🔧The customer attempted a DIY brake job but encountered issues with the front calipers.

💡The fixed caliper design of the 4Runner makes brake pad replacement easier.

⏰The video emphasizes the importance of patience, especially for flat rate technicians.

🚀Completing the brake job successfully provides a sense of accomplishment.

Q&A

What was the customer's issue with the front calipers?

—The customer encountered seized bolts or something broken off, preventing the completion of the brake job.

How does the fixed caliper design of the 4Runner make brake pad replacement easier?

—The fixed caliper design eliminates the need to remove the caliper and allows for easy access to slide in new brake pads.

What is the benefit of using slide pins in brake pad replacement?

—Slide pins facilitate the smooth movement of the caliper, ensuring even wear on the brake pads and preventing premature failure.

What challenges do flat rate technicians face?

—Flat rate technicians often lack patience due to the time constraints of their job, but patience can be beneficial in certain situations.

What is the satisfaction in completing a brake job successfully?

—Completing a brake job successfully gives a sense of accomplishment, especially when facing challenges and overcoming them.

Timestamped Summary

00:01Introduction to the Toyota 4Runner brake job and the customer's attempt at a DIY brake job.

02:40Maneuvering the 4Runner around obstacles in the shop and the reasons for doing things the hard way.

09:00Disassembling the front caliper and removing the old brake pads.

10:03Cleaning the rotor surface and installing the new rotor.

11:23Reassembling the caliper, compressing the caliper pistons, and installing the new brake pads.

13:52Demonstration of compressing the caliper pistons using pry bars and precautionary measures.

14:44Installing one side of the compressed caliper piston and highlighting the fixed caliper design.

16:40Reassembling and tightening down the caliper, completing the brake job.

Browse more